Garage Door Not Functioning-Some Common Problems and Solutions

There are two basic parts of the garage door. One is a garage door opener and the other is the garage door itself that includes the operating mechanism, its panels, the metal tracks that follow the garage door to go up and down, and the rollers that run in the tracks and are attached to the garage door.

A garage door is basically the largest electronically moving equipment around your house. Your garage door gets used more often than any other front door. In case, your garage door is not properly maintained, it can be big trouble.

There are a lot of parts that must work together to make your garage door functional. If your garage door needs a repair or maintenance service, it is normally a process of depreciation. You can start with the obvious action of hiring the best garage door company in Converse, Texas, and inspect the garage door thoroughly to find out the faults that are making your garage door malfunction. One of the complex solutions is that oftentimes there is more than one part that is going wrong within the mechanism all contributing to the malfunction. Some garage door problems are mechanical; some are the result of the wrong installation of garage door parts, and others are occurred due to negligence of garage door maintenance.

Garage door opener: There is a number of things that you need to check with the garage door opener. If it is not simply functioning, it is good to perform the easiest checkups. Make sure that your opener is getting enough power and the breaker has not been tripped.  Remember, it is plugged into the right socket properly. Look to see if there is any loose or broken wire. If the garage door opener looks fine but the garage door is not responding with the remote, check the batteries of the remote. Replace its batteries and try again.

Garage door mechanism: If your garage door is sticking or shaking on its tracks as it is raised or lowered on its tracks, you should inspect the mechanism that makes it function. One obvious garage door repair task is to fix the bent tracks that roll the garage door up and down. These tracks may become clogged due to dirt, dust, and accumulated grease. You may use mild household cleaner to clean the tracks and then use any high-quality lubricant or WD-40 to oil the rollers and to make sure that they are rolling smoothly.

Try to find out the dents or blockage in the metal tracks and make sure that the tracks are not loose. They are attached to the trim of the garage door and the ceiling with the mounting brackets. With the passage of time, these mounting brackets can be loosened due to the pressure of other tension parts. Another problem can be damaged rollers attached to the garage door itself.

If you have a wooden garage door, the strain on the moving hardware can force them to wiggle and become loose. To fix the issues, you should have a large screw and filler to fill the bigger hole. Be careful while working on garage door springs. It can be a hard and dangerous task if you don’t know what you are doing and don’t have the right tools. Leave this task to the experts.

Bottom line: Make sure that you know what is going on and have someone else who is familiar with the mechanism of a garage door. Don’t take a chance on creating more troubles by handling garage door problems that you don’t know how to conduct because you might do them in the wrong way and can cause even more serious garage door repair problems.